White Heat-Shrink 3:1 SMALL
€0.85
IN STOCK
Description
Product information "White Heat-Shrink 3:1 SMALL"
30 cm (1 ft) of White heatshrink tubing SMALL with a 3:1 shrink ratio (before shrinking 6.2 mm / 2.0 mm after shrinking).
If you need larger quantities of White heatshrink SMALL, please use the separate offering in the heatshrink SMALL spools category.
This beautiful bright white heatshrink covers the typical application range for MDPC-X SMALL and XTC cable sleeving. You can easily put it over the sleeving without any fiddling and then shrink it down to the typical wire sizes used for cable-sleeving.
Featuring safe overexpansion capabilities, this heatshrink allows for even bigger initial object diameters. With a long nosed plier inserted into the heatshrink to widen the inner diameter, you can easily and safely reach an ID of 9.0 mm - resulting in a shrink ratio of almost 4.5:1!
The sum of its properties makes the whole sleeving process very easy:
- 3:1 shrink ratio. Over-expanded you can reach a 4.5:1 shrink ratio.
- Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire.
Similar Items
100x White pre-cut heatshrink with a 3:1 shrink ratio (before shrinking 6.2 mm / 2.0 mm after shrinking): The length of each pre-cut heatshrink is 15 mm. This package includes 100 pieces (15 mm x 100 pieces = 1.5 meters). This beautiful bright white pre-cut heatshrink of 15mm length covers the typical application range for MDPC-X SMALL and XTC cable sleeving. You can easily put it over the sleeving without any fiddling and then shrink it down to the typical wire sizes used for cable-sleeving. Featuring safe overexpansion capabilities, this heatshrink allows for even bigger initial object diameters. With a long nosed plier inserted into the heatshrink to widen the inner diameter, you can easily and safely reach an ID of 9.0 mm - resulting in a shrink ratio of almost 4.5:1! The sum of its properties makes the whole sleeving process very easy: 3:1 shrink ratio. Over-expanded you can reach a 4.5:1 shrink ratio. Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire.
Content: 100 piece (€0.06 / 1 piece)