X-Deals
X-Deals is the category for extreme discounts or extremely limited offers. Have a look into this category from time to time to not miss our special offerings.
X-DEAL Commando Cable Sleeves MEDIUM
This X-DEAL brings you 5 meters of Commando-Green cable sleeves in MEDIUM size for diameters from 5.0 mm to 14.5 mm. It's an X-DEAL, because we used it for re-spooling training and it's slightly flatter than normal, but it won't matter once it's on the cable / object. Perfect for practicing, experimenting and sleeving. The offered lengths of Commando-Green cable sleeves MEDIUM are based on meters (m). 1 m is ~3.3 feet, 10 m is ~33 feet, etc.If you need 100 meter (330 ft) units of Commando-Green MEDIUM, please use the separate offering in the 100 meter category. The perfect military green cable sleeves at a medium intensity work beautifully in combination with Grey and black shades. Commando-Green is perfectly mixed to create one of the most attractive green shades in the whole green color spectrum. This green shade is also an exceptional camouflage color at outdoor use or in military themed designs. As always with MDPC-X, our colors can be used outdoors without material or color degredation, because we add Germany's latest UV stabilizing technology for absolute protection. For colorful camouflage themes you can use Commando-Green in combination with Ranger-Green, Copper-Brown or Mellow-Yellow. Enjoy the special look of Commando-Green cable sleeves by MDPC-X. For MEDIUM cable sleeves we recommend to use MEDIUM heatshrink to hold the ends of the cable sleeves in position. You can do this traditionally or by using the "heatshrink-less" melting technique. Our regular heatshrinking guide and a "shrinkless" guide is found within the description text of the main heatshrink category On our MDPC-X Instagram page you can find more impressions of this color and inspiring combinations with other colors.Also visit our MDPC-X Facebook page for more inspiration, ideas and news. Detailed information about the specific MDPC MEDIUM cable sleeves properties and typical applications with this size, you find in the CABLE SLEEVING MEDIUM category description. A full description of the general properties, features and advantages of MDPC cable sleeves, you find in the CABLE SLEEVING category description. We do our very best to provide your cable sleeves in one continuous piece. If the whole length is split into 2 pieces, we always add about 50 cm extra. The cable sleeves are provided without being spooled on a reel. Our separate 100 meter (330 feet) offerings are spooled on reels. Only MDPC is MDPC: The globally unique cable sleeves. MDPC cable sleeves are 100% Made in Germany - including all base-materials for our cable sleeves. Lead-free base-materials. No lead poisoning when inhaling fumes during shrinking / melting of MDPC cable sleeves. 100% Unique color quality in the world of cable sleeves. MDPC creates the most beautiful, saturated, brilliant and vivid colors. MDPC cable sleeving colors include Germany's high quality UV stabilizers to protect our cable sleeves at outdoor use. Highly expandable cable sleeves, perfectly right and not too tight. The universal solution for a wide range of applications. MDPC cable sleeves are made to the highest quality and protective standards of Germany's automotive industry.
CTX3 Jaws
Upgrade your compatible crimping tool to finally get the perfect crimp-terminal shapes for custom sleeved cables, especially where it really matters: 15 AWG, 16 AWG, 17 AWG and 18 AWG. CTX-3 Jaws are unique jaws to make very round (as high as wide) instead flat-oval insulation crimps (with the "bite" of course) while maintaining a very high squeeze force on the conductor - in a covered range from 15 AWG down to 26 AWG. In the gallery images for these CTX-3 Jaws, you will see how to check if your tool-body is compatible. You can of course convert your older 2-slot MDPC-X crimping tools (V1 with blue handles from 2008 and V2 with black handles from 2009 to 2016) to the CTX-3 capabilities with these CTX-3 Jaws. The only difference at the jaws from these CTX-3 to the ones on our complete CTX-4 crimp tool is the number of slots. CTX-3 offers 3 positions, while CTX-4 offers 4 positions. There are dozens of compatible tools sold under many different brand names, the only important aspect is that you measure if the jaw section of your tool is compatible: The inner width of the tool at the front, where the jaws are mounted in between, must be 4.0 mm (+- 0.1 mm). The space between the inside of the top and the inside of the bottom part of your tool, when the tool is fully closed, must be 10.0 mm (+- 0.1 mm). The distance from the center of the jaw-mounting screw hole to the edge (where the jaw gets visible) must be 5.0 mm (+- 0.1 mm). See the gallery images for visual explanation.
15-AWG hook-up wire WHITE 100m
100 meters of WHITE 15 AWG hook-up wire with an outer diameter of 2.50 mm, of course 100% tinned copper, no markings and coming as a beautiful large inner diameter ring to prevent spiral shaping as much as technically possible. Learn more about this wire by reading the description of the 10m unit offering of MDPC-X hook-up wire. Attention: Hook-up wire is a relatively heavy item. It can quickly raise the weight based shipping cost to the next level.
Content: 100 meter (€0.86 / 1 meter)
Platinum-Grey Cable Sleeve BIG
This is Platinum-Grey with a subtle grunge look at an extreme discount! Platinum-Grey is the classic light grey cable sleeve in our wide range of grey shades. Platinum-Grey is lighter than Titanium-Grey and darker than Haze-Grey cable sleeve. Platinum-Grey cable sleeve BIG for diameters from 12.0 mm to 24 mm.The offered lengths of Platinum-Grey cable sleeve BIG are based on meters (m). 1 m is ~3.3 feet, 10 m is ~33 feet, etc.If you need 100 meter (330 ft) units of Platinum-Grey BIG, please use the separate offering in the 100 meter category. The BIG cable sleeve can cover objects, tubes, cables and cable bundles up to 24 mm outer diameter. Of course this BIG cable sleeve can be used for smaller diameters than 12 mm as well, but then the inner object will be smaller than the sleeving. Remembering this, you can also put the sleeving on cables with fixed HDMI connectors, PC internal USB3 connectors and similar on their ends. On the left side you see the BIG sleeve applied to an object of 22 mm OD. In the center you see BIG sleeve applied to a hard tube of 16 mm OD while the caps of the hardtube fittings are on top of the sleeving. On the right you see BIG sleeve applied to an object with a 12 mm OD, which perfectly fills the sleeving on the lower end of its diameter range while fully stretched lengthwise. Enjoy this BIG size for a new generation of MDPC-X sleeved custom cables and tubes only limited by your imagination. On our MDPC-X Instagram page you can find more impressions of this color and inspiring combinations with other colors.Also visit our MDPC-X Facebook page for more inspiration, ideas and news. Detailed information about the specific MDPC BIG cable sleeve properties and typical applications with this size, you find in the CABLE SLEEVING BIG category description. A full description of the general properties, features and advantages of MDPC cable sleeve, you find in the CABLE SLEEVING category description. We do our very best to provide your cable sleeve in one continuous piece. If the whole length is split into 2 pieces, we always add about 50 cm extra. The cable sleeve is provided without being spooled on a reel. Our separate 100 meter (330 feet) offerings are spooled on reels. Only MDPC is MDPC: The globally unique cable sleeves. MDPC cable sleeve is 100% Made in Germany - including all base-materials for our cable sleeve. Lead-free base-materials. No lead poisoning when inhaling fumes during shrinking / melting of MDPC cable sleeve. 100% Unique color quality in the world of cable sleeve. MDPC creates the most beautiful, saturated, brilliant and vivid colors. MDPC cable sleeve colors include Germany's high quality UV stabilizers to protect our cable sleeve at outdoor use. Highly expandable cable sleeve, perfectly right and not too tight. The universal solution for a wide range of applications. MDPC cable sleeve is made to the highest quality and protective standards of Germany's automotive industry.
Platinum-Grey Cable Sleeve BIG 100m
This is Platinum-Grey with a subtle grunge look at an extreme discount! 100 meters (~330 ft) Platinum-Grey cable sleeve BIG for diameters from 12.0 mm to 24 mm.
Content: 100 meter (€0.62 / 1 meter)
PCIe-5 Connector 12VHPWR
This original 12VHPWR connector by Amphenol is compatible with 12VHPWR (PCIe-5.0) and 12V-2x6 (PCIe-5.1) PCB-headers on your GPU. The difference between the two names refers to the PCB-header versions on the card itself. The connector is fully compatible with both versions. Make your own PCIe-5 custom cables, as shown in our PCIe-5 12VHPWR custom cable guide: You don't need to sleeve the cables, but you should at least make the cables yourself to fully control their perfect technical quality and lengths, so you don't depend on others! The original Amphenol 12VHPWR crimp terminals feature the single-seam (not the potentially unsafe 2 seams) design and additionally a spring type design (not the potentially unsafe dimple design) in horizontal alignment and a maximum contact area / flat surface vertically - without any contact area reducing dimples! The 12VHPWR connector features 12-pins for electrical power and 4-pins for side-band information. When you order one (1) connector, you will also get twice the amount (24) of needed electrical power crimp terminals and twice the amount (8) of needed signal / side-band crimp terminals, allowing you to learn and practice crimping these smaller than usual (compared to ATX and common PCI-Express) crimp terminals. Important knowledge about making custom cables with the new PCIe 5, 12VHPWR connector standard: Have a look at our PCIe-5 12VHPWR custom cable guide Due to the smaller sizes in every aspect, pin to pin distance (pitch) of 3.00 mm (regular ATX / PCIe = 4.20 mm), a narrower wire insertion slot width of only 2.7 mm and smaller sized crimp terminals, you are much more limited with your choice of wire. The maximum outer diameter of your wire for the power crimp terminals can not exceed 2.7 mm, including the crimp terminal material on top of your wire insulation! The signal / side band crimp terminals are used with 23-AWG or 26-AWG wire (see gallery image for crimping technique tips). For the power wires, we recommend wire with a maximum outer diameter of 2.0 mm or less, for example a very high quality 17 AWG wire. A 16 AWG wire, as recommended in the PCIe 5 specs, will often result in imperfect crimps, which is a potential risk for your hardware. 18 AWG would be too far away from original specs in terms of electrical capacities and shouldn't be used if you don't want to risk your hardware. The gallery shows how to crimp such a wire with our CTX-3 crimping tool. Insert the empty crimp terminal into the smallest slot, close the handles only to the first stop. Strip the wire on a length between 2.5 to 3.0 mm. Insert the stripped wire correctly into the rear of the crimp terminal (as described in the gallery of the CTX-3 crimp tool). Close the handles of the crimping tool until there is good physical resistance, but not as far as the crimping tool can close! Use the "pre-opening technique" for the crimp tool, by using the little lever on the inner side of the bottom handle, as described in the CTX-3 product description text. Insert the crimped wire into the rear of the connector. As always: The top of the crimp terminal faces to the top of the connector. The top of the connector is on the side where the retention lock is. If you want to sleeve the wires "shrinkless", with the wire going into the connector, as shown in our PCIe-5 12VHPWR custom cable guide, you will use our MICRO sleeve, our 17-AWG wires (18 AWG would be too low in terms of electrical performance) and our transparent MICRO heat-shrink (to melt the sleeving perfectly). Removing / extracting the crimp terminals from the connector: Just pull with enough force in the direction of the wire. Before you re-insert the wire into the connector, make sure to re-bend the retention hooks on the terminal to its original position. Don't do this too often, as the fine structure of the hook might take damage. Enjoy the original PCI-Express Gen 5, 12VHPWR 16-pin connector and your custom PCIe 5 cables!
nVidia FE 12-pin connector
Make your own custom cables for this 12-pin nVidia micro-fit connector, as you learn in our nVidia 12-pin micro-fit custom cable guide. This is the 12-pin connector for nVidia FE (founders edition) GPU. This Micro-Fit 3.0 12-pin connector can be used with the following nVidia FE models: 3060, 3060ti, 3070, 3070ti, 3080, 3080ti, 3090. One 12-pin Micro-Fit 3.0 connector comes with 24 crimp terminals, twice as many as you need per connector. This will allow you to re-crimp if things go wrong during crimping. Important knowledge about making custom cables with the 12-pin connector for nVidia FE (founders edition) Have a look at our nVidia 12-pin micro-fit custom cable guide Due to the smaller sizes in every aspect, pin to pin distance (pitch) of 3.00 mm (regular ATX / PCIe = 4.20 mm), a narrower wire insertion slot width of only 2.7 mm and smaller sized crimp terminals, you are much more limited with your choice of wire. The maximum outer diameter of your wire for the power crimp terminals can not exceed 2.7 mm, including the crimp terminal material on top of your wire insulation! The signal / side band crimp terminals are used with 23-AWG or 26-AWG wire (see gallery image for crimping technique tips). For the power wires, we recommend wire with a maximum outer diameter of 2.0 mm or less, for example a very high quality 17 AWG wire. A 16 AWG wire, as recommended in the PCIe 5 specs, will often result in imperfect crimps, which is a potential risk for your hardware. 18 AWG would be too far away from original specs in terms of electrical capacities and shouldn't be used if you don't want to risk your hardware. The gallery shows how to crimp such a wire with our CTX-3 crimping tool. Insert the empty crimp terminal into the smallest slot, close the handles only to the first stop. Strip the wire on a length between 2.5 to 3.0 mm. Insert the stripped wire correctly into the rear of the crimp terminal (as described in the gallery of the CTX-3 crimp tool). Close the handles of the crimping tool until there is good physical resistance, but not as far as the crimping tool can close! Use the "pre-opening technique" for the crimp tool, by using the little lever on the inner side of the bottom handle, as described in the CTX-3 product description text. Insert the crimped wire into the rear of the connector. As always: The top of the crimp terminal faces to the top of the connector. The top of the connector is on the side where the retention lock is. If you want to sleeve the wires "shrinkless", with the wire going into the connector, as shown in our PCIe-5 12VHPWR custom cable guide, you will use our MICRO sleeve, our 17-AWG wires (18 AWG would be too low in terms of electrical performance) and our transparent MICRO heat-shrink (to melt the sleeving perfectly). Removing / extracting the crimp terminals from the connector will work slightly different from what you have learned with regular ATX / PCIe: You only insert one tip of the extraction tool (you can also use a needle) on one outer side of the crimp terminal at a time. After insertion and removal of the extraction tool tip, it has permanently pushed the small retention hook on the side of the terminal inwards. This hook doesn't hold the terminal in place on this side anymore. Repeat the same procedure on the other side (other retention hook) and you can pull out the wire. Before you re-insert the wire into the connector, make sure to re-bend the retention hooks on the terminal to its original position. Don't do this too often, as the fine structure of the hook might take damage. Enjoy the original 12-pin connector for nVidia FE (founders edition) GPU 30xx (and Ti) series!