Grey Heat-Shrink 4:1 MEDIUM 100m
€189.21
IN STOCK
Description
Product information "Grey Heat-Shrink 4:1 MEDIUM 100m"
Grey Heat-Shrink 4:1 MEDIUM 100 meters (330 ft) on a spool.
Read more about the properties of this heat-shrink, by reading the description of the smaller quantity offering of Grey Heat-Shrink 4:1 MEDIUM.
Similar Items
30 cm (1 ft) of MDPC Grey heat-shrink tubing 3.4:1 MEDIUM. 3.4:1 shrink ratio (of course without glue or dual wall!), going from 13 mm ID down to 4 mm, ultra thin wall with a 0.25 mm thickness at initial ID and an extreme resistance to fire. The heatshrink can be easily overexpanded to an initial diameter of 15 mm by using a long-nosed-plier, resulting in a shrink ratio of almost 4:1. 3.4:1 shrink ratio. Initial 13 mm ID for total clearance when moving the heat-shrink over many connectors and the cable sleeving in every situation. Shrinking down to 4 mm for maximum grip and compression on the cable and sleeving. Ultra-thin material (0.25 mm at initial diameter). Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique. Made in Germany only for MDPC-X. Globally unique product in a class of its own.
Content: 0.3 meter (€3.80 / 1 meter)
100 meters (~330 ft) of grey heatshrink with a 3.3:1 shrink ratio (before shrinking 6.4 mm / 1.9 mm after shrinking). This heatshrink covers the typical application range for MDPC-X SMALL and XTC cable sleeving. You can easily put it over the sleeving without any fiddling and then shrink it down to the typical wire sizes used for cable-sleeving. With a long nosed plier inserted into the heatshrink to widen the inner diameter, you can easily and safely reach an ID of 10.0 mm - resulting in a shrink ratio of almost 5:1! Enjoy a class of its own when it comes to heatshrink.
Content: 100 meter (€1.12 / 1 meter)