Transparent Heat-Shrink 4:1 MEDIUM 100m

100 meters (~330 ft) of Clear / Transparent heatshrink tubing SMALL with a 4.35:1 shrink ratio (before shrinking 6.5 mm / 1.5 mm after shrinking). This is - very likely - the best heatshrink in existence for the purpose of making custom cables with cable sleeving. This extremely transparent heatshrink is ideal for controlled "melting of cable sleeving underneath heatshrink" techniques and covers the typical application range for MDPC-X SMALL and XTC cable sleeving. The heatshrink surface has lots of grip on an object. You can easily put it over the sleeving without any fiddling and then shrink it down to the typical wire sizes used for cable-sleeving. Featuring extreme overexpansion capabilities, this heatshrink allows for even bigger initial object diameters. With a long nosed plier inserted into the heatshrink to widen the inner diameter, you can easily and safely reach an ID of 9.0 mm - resulting in a shrink ratio of almost 6:1! Enjoy a class of its own when it comes to heatshrink. The sum of its properties makes the whole sleeving process as easy as never before: 4,35:1 shrink ratio. Over-expanded you can reach a 6:1 shrink ratio. See the cable sleeve through the heat-shrink for a 100% precise positioning of the sleeving. See the melting process of the cable sleeving through the heat-shrink while doing the “shrinkless method”. Extremely soft material for the most extreme grip on wires and cable sleeve without the use of glue. Ultra-thin material (0.2 mm at initial diameter) combined with extreme transparency, almost invisible on top of cable sleeving. Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique.

30 cm (1 ft) of Clear / Transparent heatshrink tubing SMALL with a 4.35:1 shrink ratio (before shrinking 6.5 mm / 1.5 mm after shrinking).If you need larger quantities of Clear / Transparent heatshrink SMALL, please use the separate offering in the heatshrink SMALL spools category. This is - very likely - the best heatshrink in existence for the purpose of making custom cables with cable sleeving. This extremely transparent heatshrink is ideal for controlled "melting of cable sleeving underneath heatshrink" techniques and covers the typical application range for MDPC-X SMALL and XTC cable sleeving. The heatshrink surface has lots of grip on an object. You can easily put it over the sleeving without any fiddling and then shrink it down to the typical wire sizes used for cable-sleeving. Featuring extreme overexpansion capabilities, this heatshrink allows for even bigger initial object diameters. With a long nosed plier inserted into the heatshrink to widen the inner diameter, you can easily and safely reach an ID of 9.0 mm - resulting in a shrink ratio of almost 6:1! Enjoy a class of its own when it comes to heatshrink. The sum of its properties makes the whole sleeving process as easy as never before: 4,35:1 shrink ratio. Over-expanded you can reach a 6:1 shrink ratio. See the cable sleeve through the heat-shrink for a 100% precise positioning of the sleeving. See the melting process of the cable sleeving through the heat-shrink while doing the “shrinkless method”. Extremely soft material for the most extreme grip on wires and cable sleeve without the use of glue. Ultra-thin material (0.2 mm at initial diameter) combined with extreme transparency, almost invisible on top of cable sleeving. Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique.

30 cm (1 ft) of Transparent heat-shrink 4:1 MEDIUM by MDPC-X. If you need larger quantities of Transparent heat-shrink 4:1 MEDIUM, please use the separate offering in the heat-shrink 4:1 MEDIUM Spools category. Here we go with the next generation of our heat-shrink. Extreme grip without glue, 4:1 shrink ratio, going from 13.8 mm ID down to 3.5 mm. Extreme resistance to fire. Melt together your connector plastic and cable sleeving... and take it off, or just use it traditionally as an almost invisible heat shrink with its 0.25 mm thickness at initial ID. 4:1 shrink ratio. Initial 13.8 mm ID for total clearance when moving the heat-shrink over many connectors and the cable sleeving in every situation. Shrinking down to 3.5 mm for maximum grip and compression on the cable and sleeving. See the cable sleeve through the heat-shrink for a 100% precise positioning of the sleeving. See the melting process of the cable sleeving through the heat-shrink while doing the “shrinkless method”. With some practice, you can often melt together the connector plastic material with the cable sleeving. Extremely soft material for the most extreme grip on wires and cable sleeve without the use of glue. Ultra-thin material (0.25 mm at initial diameter) combined with extreme transparency, almost invisible on top of cable sleeving. Dielectric strength of 22 kV/mm. Shrink temperature (Min) of only 90°C. Constant operating range at temperatures from -60°C to +140°C. Extremely good short term resistance to fire, especially important for the “shrinkless” melting technique. Made in Germany only for MDPC-X. Globally unique product in a class of its own.