Black Cable Management Clip BIG 10x

These are our ultimate cable-management-clips: The maximum in quality and beauty, made in Germany! This BIG size is exactly specified for e. g. 8 individually sleeved wires (0.75 mm² to 1.00 mm², 18 AWG to 16 AWG). The cable bundle can be up to 12.5 mm in diameter. You need to have at least 14 mm of air vertically to the surface, where you mount the clip to. You can actually use the cable-management-clips anywhere, where a screw already holds something in place or a thread is empty. Of course you can also make your own threads or use them in any other application where you want to route your cables nicely. Tip: You can mount two clips stacked on the same fastener by rotating one of the clips 180° horizontally, doubling the total cable-routing capacity per mounting spot. If you use them inside computer systems, you typically mount them with screws (M3 or UNC) to empty motherboard-standoff threads. You can also put them on top of the motherboard by using the screws which are used to fix the motherboard to the standoffs on the tray. As always with MDPC, these cable-management-clips are without compromise: Only the best, never less.

A package of 50 screws: Black M3x6 screws with button head. A class of its own in surface smoothness and material quality, made in Germany. Fresh and shiny from the factory, these black M3 screws are made from stainless-steel and come in an extremely beautiful surface finish, of course without markings. You will need an allen-head / hex-key tool in 2.0 mm version for these screws. M3 is the winding, which is used everywhere inside a PC and many other electrical devices. For electrical insulation purposes, you can always use our M3 brainwashers as an insulator between screw and object. Of course the M3 brainwashers will also protect surfaces and paints from scratching.