Skip to main content Skip to search Skip to main navigation
Menu

Description

Product information "23-AWG hook-up wire BLACK 100m"

100 meters of 23 AWG hook-up wire Black with an outer diameter of 1.30 mm, of course 100% tinned copper, no markings and coming as a beautiful large inner diameter ring to prevent spiral shaping as much as technically possible.

Learn more about this wire by reading the description of the 10m unit offering of MDPC-X 23 AWG Black hook-up wire.

Attention: Hook-up wire is a relatively heavy item. It can quickly raise the weight based shipping cost to the next level.

Skip product gallery

Similar Items

23-AWG hook-up wire BLACK
23-AWG hook-up wire BLACK

If you want to bundle 2 of these wires into one sleeve, choose MICRO sleeve. If you want to bundle 3 or more wires, choose XTC sleeve. Black hookup wire is perfect to slightly tone down light cable sleeving colors. It's typically used with black sleeving and carbon sleevings, which include black. Stranded 23 AWG hook-up wire Black, of course 100% tinned copper, no markings and coming as a beautiful large inner diameter ring to prevent spiral shaping as much as technically possible. Stranded 23 AWG hook-up wire comes with an outer diameter of only 1.30 mm. Maximized conductor size for lowest resistance, minimized outer diameter: This is the uncompromising MDPC-X 23 AWG hook-up wire Black, of course 100% made in Germany. What's better than a high cross-sectional diameter? An even higher one! The bigger the cross-sectional diameter, the lower the electrical resistance. Heating issues at high load? Not anymore! 28 AWG or 26 AWG is the typical size in the PC industry for cooling fans and the internal wiring of internal Audio, Front-Panel, USB, Fan, LED etc. ... until now. MDPC-X raises the bar to a far bigger conductor size of 23 AWG, because we can. The outer diameter of only 1.30 mm allows you to use 23 AWG now in the same way as you used 28/28/24 AWG before - without any troubles getting the wires into the connectors. It is the perfect wire for all our small crimp terminals (fans, internal 2.54 grid, "duPont" etc.). This wire will not be exceeded anymore in electrical performance for these smaller connections. This is the maximum - ahead of the industry. Technical Data: This wire comes in rings of 10 meter lengths Tinned copper conductor in PVC insulation according to VDE 0812 -30°C to 80°C PVC insulation, flame resistant according to VDE 0482-332-1-2. Once braided with MDPC-X cable sleeving it is resistant from -58°C to +155°C. Short term peaks of 215°C can then also be handled without structural degradation Constant operating voltage: 600V, Test voltage 1.200V Electrical resistance per kilometer: max 79.9 Ohm Attention: Hook-up wire is a relatively heavy item. It can quickly raise the weight based shipping cost to the next level.

Regular price: €0.41
Crimp Terminal FAN
Crimp Terminal FAN

60x FAN FEMALE crimp terminals per 1 ordered unit for our fan CONNECTORS: These are the highest quality female crimp terminals for fan cables, fan connectors and devices which use PC motherboard onboard fan connectors for their function. You can use these FAN crimp terminals on all common wire sizes, which you find e. g. in PC / computer systems that connect to onboard fan connectors. Crimping of these female FAN crimp terminals on our 23AWG (0.25mm²) hookup wire or standard 26AWG (0.22 mm²) electrical wire will be perfect. MDPC-X recommends electrical wire with PVC insulation for crimping female FAN crimp terminals. You can find electrical wire here at MDPC-X and at some of our MDPC-X Stores around the world or in shops for electrical supplies. Combine these female FAN crimp terminals with our legendary Crimping Tool for FAN crimp terminals and you will have the full joy of shortening or building your own cables. A relatively small investment into absolute freedom in the world of creativity, cable sleeving and technology.

Content: 60 piece (€0.06 / 1 piece)

Regular price: €3.75